Latest ETX Modules are Going to Replace Obsolete Technologies

Issue 07/2010

The ETX modules MSC ETE-A945GSE and MSC ETE-PV510, both based on Intel‘s® Atom™ processors, are optimally suited for replacing the predecessor generation (based on Intel® Pentium™ M or Celeron™ M), which is going to be phased out gradually.

In order to migrate existing systems to newer technology as seamlessly as possible, some important points have to be considered.  MSC has summarized these in a „White Paper“, which is ready for downloading from the internet.

Download White Paper

To get access you just have to register following the above link. After your account has been activated you can download this white paper and other information from our embedded technology area.

Features:

• Intel^® Atom™ N270 (1.6GHz)
• Mobile Intel^® 945GSE Chipset with integrated Intel^® Graphics  Media Accelerator 950
• LVDS interface (24-bit, dual channel)
• 2nd LVDS interface via on-board connector

Features:

• Intel® Atom™ D510 (1.66GHz, dual core) with integrated Intel® GMA3150 graphics core
• Intel® ICH8M I/O controller hub
• Optional Flash disk (up to 4 GB, bootable)
• LVDS interface (18 Bit, single channel)

Common Features:

• Up to 2GB DDR2 SDRAM
• Two SATA-300, two PATA mass storage interfaces
• 10/100 Base-T Ethernet interface
• CRT interface up to 2.048 x 1.536
• Dual Independent Display supported
• PCI-to-ISA bridge
• Six USB 2.0 interfaces
• Audio interface
• Legacy interfaces (LPT, COM1/2, PS/2)
• System monitoring, watchdog
• ACPI power management
• Fully ETX 3.02 compliant
• Windows® 7, XP (embedded), CE and Linux supported

Through their computing performance these products are best qualified for replacing discontinued modules in the range from Celeron M 600MHz processors up to the fastest Pentium M.

More information. 

Further information on our embedded COM products is available on www.msc-ge.com or in our
Embedded and Industrial Products Guide [6 MB].

If you are interested in our products, please contact your regional MSC sales manager or send an email to boards@msc-ge.com